DEP uitlaatbocht staal Honda CR 250R 1988

Product Information

DEP 2 stroke pipes are produced from high quality CR1 grade, mild steel

material. Ranging from 0.9-1.2mm, depending on the model and purpose.

The 2 stroke stampings are produced through our own deep drawer

process, using CNC cylinder mounts, in-house laser cut mounting brackets

and fabricated with high quality TIG and MIG welding. All models are

available in the bare metal factory finish and nickel finish. Our 2 stroke

pipes have been designed to improve performance over the OE pipe with

in-house DYNO and track testing.

WARNING

During use exhaust systems get hot. To avoid danger of burning, do not

remove or touch until adequate cooling time has been allowed.

2 Stroke Pipes Fitting Instructions

Fit pipe loosely to mounting points – only after fitting silencer should fixings

be tightened. This product is designed only for the machine(s) stated on

the label. Some pipes are produced with flat areas to provide frame,

engine and water hose clearance. Other flats can be added to ensure

adequate clearances. In the event of fitting difficulties, notify supplying

dealer. The dealer or manufacturer can take no responsibility after the pipe

has been run on the machine.

Jetting Instruction

It is advised to run the bike for five minutes under normal riding conditions

and check the spark plug. The spark plug tip colour should be a biscuit

brown, if it is white or black/oily you may need to make some jetting

changes. Contact your local dealer for advice.

Advised jetting changes for this model:

• Use stock jetting.